Falsifiable in the fish bole (Digital Applications)

This is the final outcome of my digital applications work.

   This was the second presentation that I had to do and at this point I was much less nervous at this point. In my presentation I talked about the what Inspired me to make the zeen and what The zeen was about. I understood for the last set of presentations that is was important that I not go through every little thing that went through my mind as this would quickly become boring however I found that I was about to convey more detail in the presentation.

Final Week of work. (3D)

This week I stared and finished my final design for my 3D project. All of the pices are black and white and they are held together with steel bolts. Duing the making process I took picture of what I did to show the different processes I used. This images will be uploaded later.
  
   First I maked out the shapes this a pen and ruler and cut the shapes out with the bandsaw. Next I cut out the shape of the bass after marking it.

   Second I maked out where I was going to drill the perspex and covered it wil masking tape to stop it from snaping during the process.

   I then drilled the holes with the bench drill. (health and safety, I used safty goggles and put down the gard when using the drill to prvent debry flying into my eyes or at anyone passing by).

   Third, I selected the bolts that were the corect size and fastend the design together.

I tryed to finishe the board but was unable to because I let the measurments at collage and couldent finish the 3rd angle projection and the scale drawing of my final outcome. I will finish this before presentations on monday.

Positive Processes. (3D)

I began the designing procest for my final scultur and this is what I came up with.

The word negative will be carved out of the shape and the individual shapes will be carved out of the hole. I made this design on photoshop and used the font walkway bold. The next step was to find the materials that I would make the design from. I chose a sample of copper, clear perspex, white and black perspex and M.D.F. I found the M.D.F to be very easy to cut but it spintered very easily and this would have detractyed form the quality of the final product and could ahve take far to much time to sand. The clear perspex as good becuse it added to the theme buy makeing the prositve space more negativ, however, It was not very easy to seen and I felt this would detract for the hole effect thhat I was aiming for so I decided against it. The copper was very shine and had a good ashertic. However it was to thin and not very stable in the thiner arials of the design. Further more it took the longest to cut as it has to be cut on the jewlry bench. I finaly chose the blak and white perspect as they cut easily and together denoted the them of contract nicely.
   Finlay I started the design of my board to hold all of the info on my project. I will make it white like the final design to relate it to the them and cut words out of it to make it have negative space itself. Becuse of this thik card will have to be used so that it can hold its shape and anything that I may chose ot stick onto it.